日本一区二区在线观看,人人澡人人妻人人爽,色妞网站,加勒比官网加勒比中文网一二三区

HOME
PRODUCT
Zhongshan GDS Automation Equipment Ltd. is located in Zhongshan Xiaolan which is one of Top 10 National Famous Towns, next to “Light Capital” Guzhen. It is a company committed to research, produce and sell automatic glue dispensing and filling equipment for years.
APPLICATION
Zhongshan GDS Automation Equipment Ltd. is located in Zhongshan Xiaolan which is one of Top 10 National Famous Towns, next to “Light Capital” Guzhen. It is a company committed to research, produce and sell automatic glue dispensing and filling equipment for years.
NEWS
Zhongshan GDS Automation Equipment Ltd. is located in Zhongshan Xiaolan which is one of Top 10 National Famous Towns, next to “Light Capital” Guzhen. It is a company committed to research, produce and sell automatic glue dispensing and filling equipment for years.
CONTACT US
Zhongshan GDS Automation Equipment Ltd. is located in Zhongshan Xiaolan which is one of Top 10 National Famous Towns, next to “Light Capital” Guzhen. It is a company committed to research, produce and sell automatic glue dispensing and filling equipment for years.
ABOUT US
Zhongshan GDS Automation Equipment Ltd. is located in Zhongshan Xiaolan which is one of Top 10 National Famous Towns, next to “Light Capital” Guzhen. It is a company committed to research, produce and sell automatic glue dispensing and filling equipment for years.

Technical Parameters

Contact us

Tel：+86-0760-89829983
wechat：13726781563
WhatsApp：86-13726781563
Address：Zhongshan City Xiaolan Town East Cheung Street No. 12 lane two building (Sheng Habitat building) the first floor of building A

WeChat

please scan this QR code to add Jenny's wechat

Custom non-standard automation equipment

Current location：HOME>Soft PCB Cutter Operation instruction

Soft PCB Cutter Operation instruction

Operation steps: 1. Connect compressed air, input 0.5-0.6MPa 2. Put the PCB plate on the fixture with LED downside and lost in the slot of fixture 3. Turn the switch of blade mechanism to drop it down. Then the PCB plate is pressed and fixed 4. Push the b

Product introduction
Technical Parameters
Video display

Operation steps:

1. Connect compressed air, input 0.5-0.6MPa

2. Put the PCB plate on the fixture with LED downside and lost in the slot of fixture

3. Turn the switch of blade mechanism to drop it down. Then the PCB plate is pressed and fixed

4. Push the blade system with some strength to the direction of PCB end

5. PCB separated into strips and ready for use

Attention:

1. While changing the compressed air input, please pull the knob first, then turn to proper number, and

then push back to confirm it. DONT TURN IT BEFORE PULLING THE KNOB OUT

2. You can adjust the screw on the top of cylinder to change the stoke, then the blade mechanism height

can be changed

3. BE CAREFUL OF BLADE CUT WHILE CHANGING NEW ONES

4. Apply some lubricant oil on the guideway for long-term use.